Activity 1: Constructing a Dome
Our group is making a model of the domes we saw in Italy. From what we understand, a dome can be constructed just by using simple shapes such as triangles. The model we are constructing will be based on this shape, the triangle.
Our group is making a model of the domes we saw in Italy. From what we understand, a dome can be constructed just by using simple shapes such as triangles. The model we are constructing will be based on this shape, the triangle.
To show that domes are not so simply and easily constructed, we will be exposing part of the inside structure of the dome so as to showcase the mathematical concepts behind it.
We will be using aluminium wires and we will bend them into the shapes of triangles. Afterwards, we will use modelling clay to put an arc over this structure.
The dome without clay on yet
The triangles that we construct are equilateral triangles. The concept behind this is that if the triangles are equilateral, the stress will be equal on all struts and there will be very little wasted strength. This helps to balance out the dome as well. To make the arc of the dome more consistent, the triangles are recommended to be equilateral triangles so as to ensure that the dome will be more circular/spherical. In an equilateral triangle, all angles in the triangle should be 60ยบ and we are using the length of 3cm for each side of the triangle and so if the angles are all the same, the dome should not be leaning to one side. As for the frequency of the triangles, we try to increase them as many as possible so as to make it rounder because the more triangles there are, the rounder the dome.
Activity 2: Constructing an Arch Inspired by the Arch of Constantine
We made a “spinnable” arc inspired by one of the arches in the Arch of Constantine. It was inspired by the large arch with 3 archways is almost 26 meters (85ft) wide and 21 meters (69ft) high. During construction of the Arch of Constantine, many parts from older structures were reused, which was common practice at the time.
We made a “spinnable” arc inspired by one of the arches in the Arch of Constantine. It was inspired by the large arch with 3 archways is almost 26 meters (85ft) wide and 21 meters (69ft) high. During construction of the Arch of Constantine, many parts from older structures were reused, which was common practice at the time.
As for the “spinnable” arc, it will be made to be “interactive”. In this model, we will create the axes using brass tube and a wooden board/plank and create the arc which will somewhat be 2D to be placed onto the axes. As you spin this model, it will showcase how 2D shapes can be turned to become 3D shapes.





No comments:
Post a Comment